Managers, middle and senior management from companies seeking to enhance their knowledge of thermoplastic characterisation.
General Objectives
To know the most common techniques for characterising thermoplastic materials and to be able to interpret and relate the test results to the behaviour of the materials during processing and in the finished product.
Specific Objectives
Recognise the importance of materials characterisation;
Understand the main techniques for characterising thermoplastic materials, the standardised methods used for this purpose, and the types of test specimens and equipment required;
Be able to interpret the results and correlate them with the behaviour of the materials during processing and in the final product;
Be able to determine the most appropriate analytical technique for assessing a specific characteristic or requirement.
Sessions
Session 1
1. Introduction to polymers and rapid techniques for identifying polymer types
3 hours
04 Nov 26
09h30 - 12h30
Session 2
2. Chemical analysis by Fourier-transform infrared spectrophotometry (FTIR)
3 hours
04 Nov 26
14h30 - 17h30
Session 3
3. Thermal analysis
3 hours
05 Nov 26
09h30 - 12h30
Session 4
4. A laboratory demonstration of DSC, TGA, VICAT and HDT testing, with the option to analyse samples provided by participants
3 hours
05 Nov 26
14h30 - 17h30
Session 5
5. Rheological characterisation
3 hours
06 Nov 26
09h30 - 12h30
Session 6
6. Mechanical characterisation
3 hours
06 Nov 26
14h30 - 17h30
Cost per Trainee
Non Associated
450€
PIEP and/or APIP Associate University Student
15% Discount
No. Trainees
Minimum
8
Maximum
15
Trainers
Paula Peixoto
Degree in Polymer Engineering from the University of Minho, with over 20 years of experience in the field of plastic materials characterisation and failure analysis, currently serving as Coordinator of the Tests and Failure Analysis area and Technical Manager of the PIEP Laboratories.
To make your application fill out the following form